Vídeos de procesos
Imágenes de taller de trabajos reales: HVOF, plasma y arco, rectificado de rodillos, utillaje y acabado.
Internal Bore Spraying with the SG-100 Gun
Coating the inside diameter of a bore with our SG-100 internal spray gun - a hard-to-reach area that most spray shops cannot coat.
Ver vídeo →
Guide Roll Coating on the Spray Line
Surface preparation and spray coating of steel guide rolls used in paper, film and packaging lines - filmed on our production floor.
Ver vídeo →
Battery Electrode Calender Roll Coating
Workshop footage of a calender roll coating job for lithium-battery electrode production: part set-up, tungsten carbide spraying and surface finishing.
Ver vídeo →
0:26
HVOF Spraying of NiCr-CrC and NiCr Alloy Coatings
Supersonic HVOF spraying of NiCr-CrC and NiCr alloy powders onto steel components - dense, hard coatings for combined wear and corrosion protection.
Ver vídeo →
0:10
Arc Spraying a Paper Machine Dryer Cylinder
Twin-wire arc spraying rebuilds the surface of a paper machine dryer cylinder - restoring diameter and improving release.
Ver vídeo →
0:10
Robot Plasma Spraying Zirconia on Graphite Boats
Six-axis robot plasma spraying yttria-stabilised zirconia onto graphite boats used in sintering furnaces.
Ver vídeo →
0:26
Plasma Spraying Wear-Resistant Coating on Shaft Sleeves
Applying a wear-resistant ceramic coating to pump and motor shaft sleeves to extend service life in abrasive service.
Ver vídeo →
0:06
Yttria Coating on Graphite Crucibles
Plasma sprayed yttria (Y2O3) coating on graphite crucibles - high temperature stability and non-wetting for molten metals.
Ver vídeo →
0:17
0.2 mm Zirconia Coating on Mini Graphite Crucibles
Precision plasma spraying of a 0.2 mm zirconia layer on small graphite crucibles for laboratory melting work.
Ver vídeo →
0:07
Silicon Carbide Coating on Stainless Steel Plates
Plasma sprayed silicon carbide (SiC) coating on stainless steel plates for oxidation and corrosion resistance at high temperature.
Ver vídeo →
0:16
Wear-Resistant Coating for Agricultural Forage Blades
Tungsten carbide coating applied to forage harvester blades - cutting edges last several times longer in abrasive crop.
Ver vídeo →
0:35
Plasma Spraying Ball Valve Bodies and Valve Plates
Hard-facing valve bodies and valve plates with tungsten carbide and ceramic coatings for erosion and corrosion resistance.
Ver vídeo →
0:47
Automated Cookware Spraying Line in Operation
Turnkey cookware coating line - automatic spraying of non-stick and ceramic coatings on pots and pans.
Ver vídeo →