Servicios de recubrimiento
Servicios de recubrimiento resistente al desgaste y restauración de rodillos, cilindros, husillos y matrices.
Plasma and Thermal Spray Coating Services - Durable Wear and Corrosion Protection
Contract thermal spray coating service using plasma, HVOF, arc and flame processes. Ceramic, carbide and metal coatings for wear, corrosion, insulation and non-stick protection on customer parts, with full finishing and inspection.
Leer más →
SX-80 Plasma Spraying System and Plasma Spheroidization Powder Production Equipment
SX-80 high-energy plasma spraying system, 80-120 kW, with PLC control and SG-100 gun, for ceramic coating production and plasma spheroidization powder manufacturing. Complete line with powder feeding, cooling and classifying options.
Leer más →
Plasma Sprayed Ceramic Wear-Resistant and Insulating Coatings
Contract plasma spraying service with alumina, chromia, zirconia and AT ceramic powders. Dense wear-resistant and insulating coatings with porosity below 1 percent and bond strength above 70 MPa, for parts of any size.
Leer más →
Ceramic Coating for Plungers - Wear-Resistant and Insulating Special Ceramic Parts
Plasma sprayed special ceramic coating for pump plungers, pistons and special ceramic components. Dense, hard and electrically insulating coating with a ground and polished finish for long service life in abrasive, corrosive duty.
Leer más →
HVOF and Plasma Ceramic Insulating Coating for Printing Machine Rollers
Wear-resistant, insulating and high-temperature resistant ceramic coating for printing machine rubber rollers and corona rollers, applied by HVOF and plasma processes. Worn rollers can be stripped, re-coated and precision ground back to size.
Leer más →
Ceramic Insulating Coating for Corona Rollers
High-energy plasma sprayed alumina ceramic insulating coating for corona rollers on film treatment lines. Bond strength above 65 MPa, microhardness about HV0.3 780, thickness 0.5-2.0 mm, no breakdown at 10-20 kV / 10-30 kHz.
Leer más →
Graphite Boat Zirconia (Yttria-Stabilized) Coating Service
Plasma-sprayed yttria-stabilized zirconia (YSZ) coating for graphite boat dishes, crucibles and plates used in cemented carbide sintering. Processed on SX-80 plasma spray systems with imported SG-100 guns, delivering high-temperature corrosion resistance and extended service life.
Leer más →
Alumina and Plasma Spraying Equipment (SX-80 System)
The SX-80 plasma spraying system pairs an imported SG-100 plasma torch with an intelligent PLC control system for alumina and ceramic coating work. 100 kW class multi-mode operation, internal or external powder feeding, and components that last up to three times longer.
Leer más →
Insulating and Shielding Coating for Coating Machines
Alumina ceramic insulating and shielding coatings for electronic-industry coating machines, spray-fused with American Miller plasma equipment. Alumina purity above 99%, dielectric withstand 4000 V, uniform 50 um thickness, 15 MPa adhesion and HV900 hardness.
Leer más →
Plasma Spraying Ceramic Coating Process
A plasma torch ionises argon or nitrogen into a high-temperature jet that melts ceramic powder and propels it onto the workpiece. The coating gives the part hardness, wear resistance, heat resistance, corrosion resistance, insulation and thermal insulation in one process.
Leer más →
HVOF Tungsten Carbide Coating for Pump Shafts and Piston Rods
Pump shafts, piston rods and plungers carry seals and packings against a running surface, so wear there leads directly to leakage. A HVOF tungsten carbide coating gives that surface a dense, hard and corrosion-resistant layer that keeps the seal interface in good condition.
Leer más →
Arc Spray Coating for Large Wheels, Discs and Rotating Parts
Large wheels, discs, sheaves and rolls are expensive to replace and often impossible to source quickly. Arc spraying rebuilds their worn working surfaces and can add a wear or corrosion resistant layer at the same time, typically at a fraction of replacement cost.
Leer más →
Anti-Corrosion Surface Treatment for Steel Structures and Steelwork
For structural steel that has to survive decades of humid, coastal or chemical exposure, a thermally sprayed metal coating outperforms paint systems on its own. The sprayed layer protects the steel by sacrificial action, and the paint topcoat then only has to protect the coating itself.
Leer más →
On-Site Pipeline Thermal Spray Coating and Field Repair
Many pipelines and large steel components cannot be moved to a coating workshop. Our mobile crews prepare the surface and apply the coating on location, restoring corrosion protection or wear resistance with minimal disruption to production.
Leer más →
Zinc-Aluminum Arc Spray Anti-Corrosion Coating for Tanks and Vessels
Twin wire arc spraying of zinc-aluminum deposits a metallurgically bonded, sacrificial coating on steel surfaces. The zinc-aluminum layer corrodes preferentially and protects the steel underneath, which makes it a durable and economical answer for large steel surfaces in industrial and marine atmospheres.
Leer más →
Chrome Oxide Ceramic Coating for Sleeves and Bushings
Chrome oxide ceramic coating gives sleeves and bushings a hard, smooth and chemically stable working surface. It is the standard choice where the part must resist abrasive wear and mild corrosion at the same time, and where a low-friction running surface against a shaft or seal is essential.
Leer más →