Spray Equipment
Thermal spray equipment: plasma, HVOF, arc and cold spray systems, spray booths and turnkey coating lines.

SX-600 Double-Line Arc Spraying Machine for Metal Coatings
Twin-wire supersonic arc spray machine for zinc, aluminium, copper and alloy coatings. 22 kW power supply, 30 m remote cable, particle velocity above 400 m/s — ideal for anti-corrosion and repair work on-site.
Read more →
Tungsten Carbide Powder HVOF / Plasma Arc Spray Gun
High-velocity spray gun engineered for WC-Co, Cr3C2-NiCr and other carbide powders. Jet velocity above 1,000 m/s and particle velocity up to 800 m/s produce dense, low-porosity carbide coatings with bond strength up to 90 MPa.
Read more →
HVOF Thermal Spraying System (Oil-Fuel Supersonic Flame)
Complete oil-fuel (kerosene) HVOF system with intelligent control, double-barrel powder feeder, gas safety center and water chiller. Flame temperature 2,700 °C, coating bond strength above 70 MPa — a cost-effective alternative to hard chrome plating.
Read more →
Titanium Nitride (TiN) Coating System — Arc Ion Plating
Plasma-based TiN coating system for wear-resistant, corrosion-resistant and decorative gold-tone coatings. Arc-zone temperature approaches 20,000 K; high bond strength and low porosity on tools, moulds and hardware.
Read more →
Easy-Operation Arc Zinc Wire Metallizing Machine
Purpose-built electric arc machine for zinc wire metallizing. Sprays up to 30 kg/h of zinc for long-life anti-corrosion coatings on steel structures, bridges and boiler tubes — 30+ years protection with minimal maintenance.
Read more →
Graphite Plate Yttria Coating Production Line
Turnkey plasma spray line that applies dense yttria coatings on graphite plates and setters — anti-oxidation protection up to 1,650 °C for cemented carbide and semiconductor sintering.
Read more →
SX-80 Plasma Spray Production Line with Soundproof Booth & Dust Collector
Complete 80 kW plasma spray production line with soundproof booth, pulse dust collector and robot manipulator for thermal barrier and ceramic coatings. Turnkey delivery with training.
Read more →
Corundum Setter Plate Zirconia Coating Line
Plasma spray line applying dense ZrO2 coatings on corundum setter plates — thermal insulation and anti-stick performance for high-temperature sintering furnaces.
Read more →
Zirconia-Alumina Coated Graphite Plates for High-Temp Sintering
Graphite plates and saggers plasma-sprayed with ZrO2/Al2O3 dual-ceramic coatings — anti-carbon-contamination protection for 1,600 °C+ sintering.
Read more →
Graphite Boat Anti-Stick YSZ Coating Line
Plasma spray line applying YSZ anti-stick coatings to graphite boats for cemented carbide sintering — 20+ reusable cycles per coating, 50+ lines delivered.
Read more →
SX-80 Plasma Spray System
80 kW class plasma spray system for ceramic and metal powder coatings. Ideal for chromium oxide, alumina and zirconia coatings on industrial rolls and cylinder surfaces.
Read more →
Newly upgraded SX-90 plasma spraying equipment
Complete thermal spray production line including spray booth, dust collector, manipulator, chiller and control system.
Read more →
SX-9000 HVOF Supersonic Flame Spray System
Kerosene-fueled HVOF system for dense tungsten carbide and metal-ceramic coatings with particle speeds up to 1100 m/s.
Read more →
SX-8000 Supersonic Flame Spraying Equipment
High-velocity oxygen fuel spray system producing dense tungsten carbide coatings with hardness above 1100 HV, perfect for rolls and wear parts.
Read more →
SX-5000 Supersonic Flame Spraying System
SX-5000 HVAF supersonic system using compressed air as oxidant - a 200 kW gun plus internal-diameter gun for dense carbide and metal coatings at lower running cost than oxygen-based HVOF.
Read more →